| Xiaomi Mijia G1 | Xiaomi Mijia 1C |
|---|---|
| 🔴2200 Pa Suction Power | ✅2500 Pa Suction Power |
| ✅600 ml Dust Bin | ✅600 ml Dust Bin |
| ✅200 ml Water Tank | ✅200 ml Water Tank |
| ✅Water Flow Control | ✅Water Flow Control |
| ✅Slim Body – 82 mm | ✅Slim Body – 82 mm |
| ✅2 Side Brushes | 🔴1 Side Brush |
| 🔴No Zone cleaning | ✅Zone cleaning |
| ✅Auto Recharge | ✅Auto Recharge |
| 🔴Gyroscope for Navigation | ✅Visual sensor for Navigation |
| ✅90 min Working time | ✅90 min Working time |
| ✅Carpet boost | ✅Carpet boost |
| ✅Cheaper | 🔴More Expensive |
As you can see, according to the table above, the Xiaomi Mijia 1C robot vacuum cleaner has a few improvements over the Xiaomi Mijia G1
Although Xiaomi Mijia G1 has some features that Mijia 1C does not have – like 2 Side brushes and it is cheaper.
So, let’s take a closer look at both these robot vacuums for a low price.
Design of robot vacuums: Xiaomi Mijia G1 vs. Xiaomi Mijia 1C
Both robot vacuums Xiaomi Mijia G1 and Xioami Mijia 1C have almost identical designs.
Dimensions of them are nearly are same – length and width are 35 cm. While there is a slight height difference (Xiaomi Mijia G1 – 8.20 cm and Xiaomi Mijia C1 –8.15 cm), C1 is a bit slimmer in comparison with C1, but the difference is not noticeable.
When you compare Xiaomi Mijia G1 and Xiaomi Mijia 1C side by side, it is hard to tell which one robot vacuum is G1 and which one is 1C.
These robots have the same design: white round shape, with an infrared sensor on the front and without a LIDAR tower on the top.
There are two ways how to distinguish these robots – Xiaomi Mijia G1 has two side brushes, while Xiaomi Mijia 1C has only one. Another difference would be the Visual Sensor on the top of the 1C, up to the power button – Xioami Mijia G1 has not sensor like that.
Cleaning performance: Xiaomi Mijia G1 vs. Xiaomi Mijia 1C
In a comparison of pure suction power, the Xiaomi Mijia 1C beats Xiaomi Mijia G1 by 300 Pa (2500 Pa vs. 2300 Pa). So, 1C has better suction than G1 – it will suck more debris, dust, and other dirt.
However, if we compare Xiaomi Mijia G1’s suction with other robot vacuums, we can clearly say that the suction power of 2300 Pa is more than enough. Because robot vacuums like Roborock S5, S6, S5 MAX, and others have power suction of 2000 Pa and they are way more expensive.
Still, Xiaomi Mijia G1 is capable of collecting lots of debris because of two side brushes. Xiaomi Mijia 1C has only one side brush, so it is a clear Mijia G1 improvement over the Mijia 1C.
Regarding navigation capabilities, Xiaomi Mijia 1C has a visual sensor and VSLAM + 4 Core Processor, while Xiaomi Mijia G1 depends mainly on Gyroscope.
Thus, Xiaomi Mijia 1C navigation and mapping are more precise than Xiaomi Mijia G1 – it would be stuck more rarely and would be more accurate with its tasks.
Moreover, Xiaomi Mijia G1 has no zone cleaning, and you cannot set no-go areas for it, while Xiaomi Mijia 1C has these features.
Yet, Xiaomi Mijia G1 has all the sensors that it needs to not fall from the cliff, stairs. Also, it is creating a map of the house in real-time, so there is no irregular bouncing like on other cheap robots. Xiaomi Mijia G1 does not leave any spot uncleaned.
For curiosity, it has to note that Xiaomi Mijia G1 has a larger battery than Xiaomi Mijia 1C (2500 mAh vs. 2400 mAh). Still, the working time of both robot vacuums is around 90 min, and they can clean around 100 m2. If the cleaning area is larger – when the battery is running out, these robots will come back to their charger and would resume their cleaning task after fully recharge.
Mopping capabilities: Xiaomi Mijia G1 vs. Xiaomi Mijia 1C
Xiaomi Mijia G1 and Xiaomi Mijia 1C have stunning features regarding mopping, which beats not only almost every cheaper robot vacuum but also and premium ones like Roborock S6.
Firstly, both robots G1 and 1C have a 200 ml water tank (while Roborock S6 has a 140 ml water tank). So it is clear that their robots are capable of mopping large areas – more than 120 m2.
Moreover, Xiaomi Mijia G1 and Xiaomi Mijia 1C have Water pumps. So, these robots have more pressure while mopping, and you can set a dripping level of the water.
You can pick from 3 levels of water dripping: low, medium, and max. It depends on how wet mopping of robot vacuum you would want.
Bottom line: Xiaomi Mijia G1 vs. Xiaomi Mijia 1C
| Xiaomi Mijia G1 | Xiaomi Mijia 1C |
|---|---|
| ✅Cheaper | ✅More powerful |
| ✅2 Side Brushes | ✅Improved navigation |
| ✅No-go areas | |
| ✅Zone cleaning |
So, following the above, it is easy to say that Xiaomi Mijia 1C is an improved version of Xiaomi Mijia G1. It is more powerful, has a visual sensor, and features like No-go areas and Zone cleaning.
While Xiaomi Mijia G1 is cheaper than Xiaomi Mijia 1C and has Two Side Brushes for better cleaning.
Thus, there is no essential difference between Xiaomi Mijia G1 and 1C navigational and cleaning capabilities. It is recommended to choose Xiaomi Mijia 1C over Xiaomi Mijia G1 only if you would need features like Zone Cleaning and No-go areas.
For example, if you have areas in your room in which you do not want for a robot vacuum to come and you can not close them physically – under the bed, nearby plants, or similar. Or if you would like for robot vacuum to clean only specific zone – carpet in the living room, area in the kitchen and similar.
In other situations, if you do not need these features, pick Xiaomi Mijia G1 because it is cheaper. Moreover, it’s navigation and cleaning features are quite good.
Top Deals for Xiaomi Mijia G1 and 1C
This site contains affiliate links to products. We may receive a commission for purchases made through these links at no extra cost to you.
Xiaomi Mijia 1C
Banggood coupon:
BGPLXMCF – €155
€155 from Banggood Poland Warehouse
If you have any recommendations, comments, questions or do you need any help regarding this post, please contact us on Facebook.